F23 Wheel

 Technical Characteristics:

- Special brush for working in narrow areas.
- Brushing of irregular surfaces where it is especially indicated due to its great flexibility.
- Can be used as a single unit or assembled in series on the same shaft to obtain the required width of
cepillado deseado.

 Applications and uses:

- Deburring of cut edges of tubes and profiles, both in manual and automatic systems.
- In steel, brass and stainless steel

Category:

Measures

Wheel Uñeta (width 12mm)

Diameter

Outside (D)		Púa overhang (S)CodeR.P.M..
Brass-plated steelStainless SteelBrass
mm / «mm / «0,15mm

.006″

CD		0,20mm

.008″

CE		0,30mm

.012″

CG		0,40mm

.016″

CI		0,20mm

.008″

BE		0,30mm

.012″

BG		0,30mm

.012″

HG		Recom.Máx
100 / 4″20 / 3/4″231003CD231003CE231003CG231003CI231003BE231003BG231003HG3.8006.000
125 / 5″32 / 1.1/4″231203CD231203CE231203CG231203CI231203BE231203BG231203HG3.0006.000
150 / 6″28 / 1.1/8″231503CD231503CE231503CG231503CI231503BE231503BG231503HG2.5006.000
175 / 7″40 / 1.1/2″231703CD231703CE231703CG231703CI231703BE231703BG231703HG2.2006.000
200 / 8″53 / 2.1/16″232003CD232003CE232003CG232003CI232003BE232003BG232003HG2.0004.500
225 / 9″50 / 2″232203CD232203CE232203CG232203CI232203BE232203BG232203HG1.8003.600
250 / 10″62 / 2.3/8″232503CD232503CE232503CG232503CI232503BE232503BG232503HG1.5003.600

 

Table of axles

Brush diameter100 – 125 mm / 4″ – 5″150 – 175 – 200 mm / 6″ – 7″ – 8″ 225-250-300 / 9”-10”-12”
Fixed axle 13 – 16 – 20 – 22 – 26 mm / 1/2″ – 5/8″ – 3/4″ – 7/8″ – 1″ 13 – 16 – 20 – 22 – 26 – 30 – 36 -40 mm / 1/2″ – 5/8″ – 3/4″ – 7/8″ – 1″ – 1.3/16″ – 1.3/8″ – 1.1/2″ 16-20-22-26-36-40-50 mm / 5/8″-3/4″-7/8″-1″-1.3/8″-1.1/2”- 2″

Additional information

Weight 2 kg
Dimensions 30 × 2 × 20 cm

Related products